Professor Bassam Abu-Hijleh

Professor Bassam Abu-Hijleh


Dean of Faculty of Engineering & IT, Atkins Chair, Head of PhD in Architecture and Sustainable Built Environment, and MSc. in Sustainable Design of Built Environment Programmes.
He is an Honorary Fellow at Cardiff University – UK. He received his PhD in Mechanical Engineering (Thermal Sciences) from the Ohio State University-USA in 1990

Contact details

+971 4 279 1400 Ext: 447
+971 4 279 1490
bassam.abuhijleh@buid.ac.ae

 

Prof. Bassam Abu-Hijleh is currently assigned as the Dean of Faculty of Engineering & IT as well as the Atkins Chair of the MSc and PhD Sustainable programmes at the British University in Dubai (BUiD). He holds a PhD in Mechanical Engineering from the Ohio State University-USA. With 25 years’ post-PhD experience in energy related academia and research Prof. Abu-Hijleh have a strong technical background in Energy related topics with special focus on Renewable Energy and Energy Management & Conservation. His current research interests focuses on Experimental and simulation study of solar energy, Renewable/alternative energy sources, advanced energy production practices and Energy conservation & management. He published more than 100 papers in international journals and conferences. He is LEED AP and CEM professional and is currently assigned as the Assistant Director for Int. Membership Development Middle East for the Association of Energy Engineers (AEE).

 

Degrees / Professional Qualification’s

  • PhD in Mechanical Engineering, The Ohio State University, USA
  • MSc in Mechanical Engineering, The Ohio State University, USA
  • BSc in Mechanical Engineering, The Ohio State University, USA

 

 

Journal Articles:

Leister, A. and Abu-Hijleh, B. (2015). Energy Consumption and Thermal Comfort Analysis of Public Housing in Sao Paulo, Brazil. Review of Energy Technologies and Policy Research, vol. 2, pp. 1-15.

Fadeyi, M., Alkhaja, K., Bin Sulayem, M. & Abu-Hijleh, B. (2014). Evaluation of indoor environmental quality conditions in elementary schools' classrooms in the United Arab Emirates. Frontiers of Architectural Research, vol. 3 (2), pp.166-177.

Al-Amir, J., &  Abu-Hijleh, B. (2013).  Strategies and Policies from Promoting the Use of Renewable Energy Resource in the UAE. Renewable & Sustainable Energy Reviews, vol. 26, pp. 660-667.

Taleb, D., & Abu-Hijleh, B. (2013). Urban heat islands: Potential effect of organic and structured urban configurations on temperature variations in Dubai, UAE. Renewable Energy, vol. 50, pp. 747-762. (online Sept 2012).

Al-Masri, N., & Abu-Hijleh, B. (2012). Courtyard Housing in Midrise Buildings - An Environmental Assessment in Hot-Arid Climate. Renewable & Sustainable Energy Reviews, vol. 16 (4), pp. 1892-1898.

AlFarra, H., & Abu-Hijleh, B. (2012). The Potential Role of Nuclear Energy in Mitigating CO2 Emissions in the United Arab Emirates. Energy Policy, vol. 42, pp. 272-285.

Saadah, Y., & Abu-Hijleh, B. (2010). Decreasing CO2 Emissions and Embodied Energy During the Construction Phase Using Sustainable Materials. International Journal of Sustainable Building Technology and Urban Development, vol. 1 (2), pp. 115-120, 2010.

Hammad, F., & Abu-Hijleh, B. (2010). The Energy Savings Potential of Using Dynamic External Louvers in an Office Building. Energy and Buildings, vol. 42 (10), pp 1888-1895.

Li, H.F., Tu, J.Y., Subic, A., & Abu-Hijleh, B. (2006). The Leakage Analysis in a Twin-screw Supercharger by Using an Integrated CAD/CFD Three-dimensional Model. Computational Methods, Springer (Editors, G. R. Liu et al), pp. 1917-1921.

Abu-Hijleh, B., Tu, J., & Subic, A. (2006). Effect of Rotor’s Aspect Ratio and Casing Inlet/Outlet Geometry on the Efficiency of a Rotor-Casing Assembly. International Journal of Vehicle Design, vol. 40 (4), pp. 349-370.

Abu-Hijleh, B. (2005). Fin Placement for Optimized Forced Convection Heat Transfer from a Cylinder in Cross-Flow. International Journal of Numerical Methods in Heat and Fluid Flow,vol. 15 (3), pp. 277-295.

Abu-Hijleh, B. (2004). Mixed Convection Heat Transfer from a cylinder with Highly Conductive Fins in Cross Flow. Journal of Heat Transfer Engineering, vol. 25 (6), pp. 34-45.

Abu-Hijleh, B. A., Al-Nimr, M. A., & Hader, M. A. (2004). Thermal Equilibrium in Transient Forced Convection Porous Channel Flow. Journal of Transport in Porous Media, vol. 57 (1), pp. 49-58.

Abu-Hijleh, B. (2003). Effect of Water Emissivity on Solar Still Efficiency. International Journal of Sustainable Energy, vol. 23 (1-2), pp. 13-19.

Abu-Hijleh, B. (2003). Enhanced Forced Convection Heat Transfer from a Cylinder using Permeable Fins. ASME Journal of Heat Transfer Engineering, vol. 125 (5), pp. 804-811.

Abu-Hijleh, B. (2003). Natural Convection Heat Transfer from a Cylinder with High Conductivity Permeable Fins. ASME Journal of Heat Transfer, vol. 125 (2), pp. 282-288.

Abu-Hijleh, B. (2003). Optimized use of Baffles for Reduced Natural Convection Heat Transfer from a Horizontal Cylinder. Journal of Thermal Sciences,vol. 42, pp. 1061-1071.

Abu-Hijleh, B. & Rababa’h, H., M. (2003). Experimental Study of a Solar Still with Sponge Cubes in Basin. Journal of Energy Conversion & Management, vol. 44 (9), pp. 1411-1418.

Abu-Hijleh, B. A., Al-Nimr, M. A., & Hader, M. A. (2003). Thermal Equilibrium in Transient Conjugated Forced Convection Channel Flow. Journal of Numerical Heat Transfer, vol. 43 (3), p. 327-339.

Abu-Hijleh, B. (2003). Optimization of Natural Convection Heat Transfer from a Cylinder with High Conductivity Fins. Journal of Numerical Heat Transfer, vol. 43 (1), pp. 65-82.

Abu-Hijleh, B. (2003). Heat Transfer from a Cylinder with high Conductivity Fins in Cross-Flow. International Journal of Thermal Sciences, vol. 42 (8), pp. 741-748.

Al-Nimr, M., Abu-Hijleh, B., & Hader, M. (2003).  Effect of Thermal Losses on the Microscopic Hyperbolic Heat Conduction Model. Journal of Heat & Mass Transfer, vol. 39 (3), pp. 201-207.

Abu-Hijleh, B. (2002). Mixed Convection Heat Transfer from A Cylinder with Baffles in Cross Flow. ASME Journal of Heat Transfer, vol. 124 (6), pp. 1064-1071.

Al-Nimr, M. A., & Abu-Hijleh, B. A. (2002). Validation of Thermal Equilibrium Assumption in the Transient Conjugated Forced Convection in Porous Channel. Journal of Transport in Porous Media, vol. 49 (2), pp. 127-138.

Abu-Hijleh, B. (2002). Entropy Generation due to Cross-Flow Heat Transfer from a Cylinder Covered with an Orthotropic Porous Layer. Journal of Heat and Mass Transfer, vol. 39 (1), pp. 27-40.

Abu-Hijleh, B. (2001). Laminar Forced Convection Heat Transfer from a Cylinder Covered with an Orthotropic Porous Layer in Cross-Flow. International Journal of Numerical Methods for Heat & Fluid Flow, vol. 11 (2), pp. 106-120.

Abu-Hijleh, B. (2001). Use of Baffles for Heat Transfer Reduction From a Cylinder in Cross-Flow. Journal of Numerical Heat Transfer, vol. 40 (4), pp. 421-443.

Abu-Hijleh, B. (2001). Natural Convection Heat Transfer from a Cylinder Covered with an Orthotropic Porous Layer. Journal of Numerical Heat Transfer, vol. 40 (7), pp 767-782.

Abu-Hijleh, B. (2001). Natural Convection Heat Transfer and Entropy Generation from a Cylinder with High Conductivity Fins. Journal of Numerical Heat Transfer, vol. 39 (4), pp. 405-432.

Al-Nimr, M., A., & Abu-Hijleh, B. A. (2001). Validation of the Thermal Equilibrium Assumption in the Transient Conjugated Forced Convection Channel Flow. Journal of Heat and Mass Transfer, vol. 37 (4/5), pp. 511- 518.

Abu-Hijleh, B. A., Abu-Qudias, M., & Al-Khateeb, S. (2001). Experimental Study of a Solar Still with Screens in Basin. International Journal of Solar Energy, vol. 21 (4), pp. 257-266.

Abu-Hijleh, B. A., & Al-Nimr, M. A. (2001). The Effect of the Local Inertial Term on the Fluid Flow in Channels Partially Filled with Porous Material. International Journal of Heat and Mass Transfer, vol. 44 (8), pp. 1565-1572.

Abu-Hijleh, B. (2001). Modified Reattaching Shear Layer Using a Stationery Cylinder. International journal of Fluid Mechanics Research, vol. 29 (2-4), pp. 200-212.

Abu-Hijleh, B. (2000). Modifying a Reattaching Shear Layer Using a Rotating Cylinder. Journal of Computers and Fluids, vol. 29, pp. 261-273.

Abu-Hijleh, B. (2000). Natural Convection Heat Transfer and Entropy Generation from a Cylinder with Baffles. ASME Journal of Heat Transfer,vol. 122 (4), pp. 679-692,

Haddad, O., M., Abu-Qudais, M., Abu-Hijleh, B. K., & Maqableh, A., M. (2000). Entropy Generation due to Laminar Incompressible Flow Past a Parabolic Cylinder. International Journal of Numerical Methods for Heat & Fluid Flow, vol. 10 (7), pp. 770-779.

Abu-Hijleh, B. (2000). Heat Transfer From a 2D Backward Facing Step With Isotropic Porous Floor Segments. International Journal of Heat and Mass Transfer, vol. 43 (15), pp. 2727-2737.

Abu-Hijleh, B., Abu-Qudais, M., & Nada, E., A. (1999). Numerical Prediction of Entropy Generation due to Natural Convection From a Horizontal Cylinder. ENERGY, vol. 24 (4), pp. 327-333.

Abu-Hijleh, B., A., & Heilen, W., N. (1999). Entropy generation due to Laminar Natural Convection over a Heated Rotating Cylinder. International Journal of Heat and Mass Transfer, vol. 42 (22), pp. 4225-4233.

Abu-Hijleh, B., A. (1999). Incompressible Turbulent Reattaching Shear Layer Flow Over a Backward Facing Step With Orthotropic Porous Floor Segments. International Journal of Fluid Mechanics Research, vol. 20 (5&6), pp. 568-583.

Abu-Hijleh, B., A. (1999). Laminar Mixed Convection Correlations for an Isothermal Cylinder in Cross Flow at Different Angles of Attack. International Journal of Heat and Mass Transfer, vol. 42 (8), pp. 1383-1388.

Abu-Hijleh, B., A. & Heilen, W. N. (1998). Correlation for Laminar Mixed Convection From a Rotating Cylinder. International Communications in Heat and Mass Transfer, vol. 25 (6), pp. 875-884.

Abu-Hijleh, B., A. &  Jadallah, I. N., & Nada, E. A. (1998). Entropy Generation due to Natural Convection From a Horizontal Isothermal Cylinder in Oil. International Communications in Heat and Mass Transfer,  vol. 25 (8), pp. 1135-1143.

Abu-Hijleh, B., A. , Mousa, M., Al-Dwairi, R., Al-Kumoos, M., & Al-Tarazi, S. (1998). Feasibility Study of a Municipality Solid Waste Incineration Plant in Jordan. Journal of Energy Conversion and Management, vol. 39 (11), pp. 1155-1159.

Abu-Hijleh, B., A. (1998). Numerical Solution of Periodic Heat Transfer in an Anisotropic Cylinder Subject to Asymmetric Heat Flux. Journal of Heat Transfer Engineering, vol. 19 (4), pp. 68-74.

Abu-Hijleh, B., A. (1998). Entropy Generation In Laminar Convection From an Isothermal Cylinder in Cross Flow. ENERGY, vol. 23 (10), pp. 851-857.

Abu-Hijleh, B., A. & Abu-Qudais, M. (1998).  Thermal Insulation Behavior of a Multi-Layer Orthotropic Cylinder. ENERGY,  vol. 23 (1), pp. 43-49.

Abu-Hijleh, B., A., Atallah, R., Mustafa, M., Al-Asker, M., & El-Masoud, L. (1998). Feasibility Study of a Combined Electric Power and Water Desalination Plant in Jordan. Journal of Energy Conversion and Management, vol.39 (11), pp. 1207-1213.

Abu-Hijleh, B., A. (1997). Numerical Solution of Periodic Heat Transfer in an Anisotropic Cylinder Subject to Asymmetric Temperature Distribution. Journal of King Saud University,vol. 9, Eng. Sci. (2), pp. 265-293.

Abu-Hijleh, B., A. (1997). Thermal Insulation Characteristics of an Orthotropic Cylinder Subject to Periodic and Asymmetric Heat Flux. Journal of Heat Transfer Engineering, vol. 18 (4), pp. 49-56.

Abu-Hijleh, B., A. (1997). Analytical Solution of Heat Transfer in a Multi-Layer Orthotropic Cylinder Subject to Periodic and Asymmetric Heat Flux. Journal of King Saud University, vol. 9, Eng. Sci. (2), pp. 251-264.

Abu-Hijleh, B., A. (1997). Convection Heat Transfer from a Laminar Flow Over a 2-D Backward Facing Step With Asymmetric and Orthotropic Porous Floor Segments. Journal of Numerical Heat Transfer, vol. 31 (3), pp. 325-335.

Abu-Hijleh, B., A. (1997). Enhanced Thermal Insulation Characteristics of a Cylinder Using Orthotropic Material. ENERGY, vol. 22 (5), pp. 471-476.

Abu-Hijleh, B., A. & Mousa, H., A. (1997). Water Film Cooling Over the Glass Cover of a Solar Still Including Evaporation Effect. ENERGY, vol. 22 (1), pp. 43-48.

Abu-Hijleh, B.,  A. (1996). Enhanced Solar Still Efficiency Using Water Film Cooling of the Glass. Desalination, vol. 107 (3), pp. 235-244.

Abu-Qudais, M., Abu-Hijleh, B., A. & Othman, O., N. (1996). Experimental Study and Numerical Simulation of a Solar Still Using an External Condenser. ENERGY, vol. 21 (10), pp. 851-855.

Samimy, M., & Abu-Hijleh, B., A., K. (1990). Structure of a Reattaching Supersonic Shear Layer. AIAA Journal, vol. 28 (6), pp. 969-970.

Samimy, M., & Abu-Hijleh, B., A., K. (1989). Performance of Laser Doppler Velocimeter with Polydisperse Seed Particles in High-Speed Flows. Journal of Propulsion and Power, vol. 5 (1), pp. 21-25.

 

 

 

Conference Papers:

Al-Badri, N., & Abu-Hijleh, B. (2014). Grid Electricity Demand Reduction through Applying Active Strategies in Baghdad-Iraq. Proceedings of the World SB14 conference.Barcelona, Spain. 28-30 October.

Rajabi, T., & Abu-Hijleh, B. (2014). The Study of Vegetation Effects on Reduction of Urban Heat Island in Dubai. Proceedings of the World SB14 conference. Barcelona, Spain. 28-30 October.

 AlFaris, F., Abu-Hijleh, B., & Ameer, A. (2014). Optimization of the Energy Performance in the Hospitality Sector in  UAE by using the Integrated Control Methodology in the Guest Rooms. Proceedings of the 7th International Conference on Sustainable Energy & Environmental Protection (SEEP2014). Dubai, UAE. 23-25 November.

Riza, R., & Abu-Hijleh, B. (2014). A study on integrating traditional windcatchers in modern buildings to reduce thermal discomfort. Proceedings of the 7th International Conference on Sustainable Energy & Environmental Protection (SEEP2014). Dubai, UAE. 23-25 November.

Yassine, F., & Abu-Hijleh, b. (2013). Potential Energy Savings Achievable by Shading Devices: A Case Study of an Office Building in Dubai. Proceedings of the SB13 Dubai conference. Dubai, UAE. 8-10 December.

Almarri, K., & Abu-Hijleh, B. (2013). Utilisation of PPPs in promoting green growth in the UAE. Proceedings of the SB13 Dubai conference.Dubai, UAE. 8-10 December.

Al-Geresi, S., & Abu-Hijleh, B. (2013). The energy saving potential of using the optimum external louvers configurations in UAE climate condition. Proceedings of the SB13 Dubai conference.Dubai, UAE. 8-10 December.

Awadh, O., & Abu-Hijleh, B, (2013). The Impact of External Shading and Windows’ Glazing and Frame on Thermal Performance of Residential House in Abu-Dhabi. Proceedings of the SB13 Dubai conference. Dubai, UAE. 8-10 December.

Abu-Hijleh, B., & Arghavan, N. (2013). Economic and Environmental Benefits of Using Hybrid Taxies in Dubai-UAE. Proceedings of the SB13 Dubai conference. Dubai, UAE. 8-10 December.

Al-Badri, N., & Abu-Hijleh, B. (2013). Grid Electricity Demand Reduction through Applying Passive Strategies for a House in Baghdad – Iraq. Proceedings of the SB13 Dubai conference.Dubai, UAE. 8-10 December.

Manneh, A., AlNaqbi, A., AlAwadhi, W., Kazim, A., & Abu-Hijleh, B. (2013). Economic Assessment of Refurbishment of Federal Public Housing in the UAE. Proceedings of the SB13 Dubai conference. Dubai, UAE. 8-10 December.

Fadeyi, M.,  Alkhaja,K., Bin Sulayem, M., & Abu-Hijleh, B. (2013). Provision of Energy Efficient and Healthy Indoor Environmental Quality (IEQ) Solutions: Case Studies of Eight Elementary Schools in the United Arab Emirates. Proceedings of the 11th REHVA World Congress CLIMA 2013. Prague, Czech Republic. 16–19 June.

Fadeyi, M.,  Alkhaja,K., Bin Sulayem, M., & Abu-Hijleh, B. (2013). Evaluation of Indoor Environmental Quality (IEQ) Conditions in United Arab Emirates (UAE) Elementary Schools. Proceedings of the 11th REHVA World Congress CLIMA 2013, Prague, Czech Republic. 16–19 June.

Katanbafnasab, M., & Abu-Hijleh, B. (2013). Assessment of the Energy Impact of Using Building Integrated Photovoltaic and Electrochromic Glazing in Office Building in UAE. Presented at the 2013 Power and Energy Engineering Conference (PEEC 2013). Sanya-CHINA. 31st December – 2nd January.

AlAwadhi,W., AlNaqbi, A., Manneh,A., Kazim, A., & Abu-Hijleh, B. (2013). Energy Saving Potential Due to Refurbishment of Federal Public Housing in the UAE. Presented at the 2013 Power and Energy Engineering Conference (PEEC 2013).Sanya-CHINA. 31st December – 2nd January.

AlNaqbi, A., AlAwadhi, W., Manneh, A., Kazim, A., & Abu-Hijleh, B. (2012). Survey of the Existing Residential Buildings Stock in the UAE. Presented at the 4th Journal Conference on Environmental Science and Development (JCESD). Bangkok. 24-25 November.

Katanbafnasab, M., & Abu-Hijleh, B. (2012). Impact of Using Thin-Film BIPV on the Overall Energy Consumption in an Office Building in Abu-Dhabi-UAE. Presented at the International Conference on Solar energy for MENA region (INCOSOL).Amman., 22-23 October.

Al-Amir, J., & Abu-Hijleh, B. (2012). Strategies for Promoting and Integrating Renewable Energy Resources in the UAE. Presentation at the 5th International Conference on Sustainable Energy and Environmental Protection SEEP2012.Dublin. 5-8 June.

Amin, G., & Abu-Hijleh, B. (2012). Energy Performance of a Residential Villa in Dubai Designed in Accordance with the Abu Dhabi PEARL Villa Rating System. Presentation in the 1st International Conference on Building Sustainability Assessment.Portugal. 23-25 May.

Bader, M., & Abu-Hijleh, B. (2011). Experimental Testing of the Water Saving Potential of Different Faucet Aerators and their Performance over Time. Presented at the 2011 International Conference on Water, Energy and Environment.AUS-Sharjah, UAE. 14-17 November.

Aguiar, A., & Abu-Hijleh, B. (2010). Energy Performance of Current Public Housing Buildings in Sao Paulo-Brazil and Potential Improvements. Presented at the Sustainable Buildings 2010 Brazil Conference (SB10Brazil).Sao Paulo-Brazil. 8-9 November.

Abu-Dakka, M., & Abu-Hijleh, B. (2010). Use of Computer Simulation to Reduce the Energy Consumption in a Tall Office Building in Dubai-UAE. Included the 10th International Conference for Enhanced Building Operations (ICEBO 2010).Kuwait.  26-28 October.

Saadah, Y., & Abu-Hijleh, B. (2010). Decreasing the CO2 emissions and the Embodied Energy in the UAE Through the Selection of Sustainable Building Materials. Presented at the International Conference on Sustainable Building Asia (SB10 Seoul). Ansan, Korea. 24-26 February.

Abu-Hijleh, B. (20009). Use of CFD to Optimize the Performance of Building-Integrated Windturbine. Presented at the 3rd IASTED Asian Conference on Power and Energy Systems (AsiaPES 2009). Beijing, China. 12-14 October.

Abu-Hijleh, B.(2008). Fast Track Research to Practice. The New Way for Business to Meet the Worlds Environmental Challenges. Presented at the 17th International Conference on Management of Technology (IAMOT 2008).Dubai, UAE. 6-10 April.

Abu-Hijleh, B. (2007). Heat Rejection through the Piles of High-Rise Buildings in Hot Climates. Presented at the 8th International Conference on Multi-purpose High-Rise Towers and Tall buildings (IFHS 2007).Abu Dhabi, UAE. December 10-12.

Abu-Hijleh, B. (2007). Use of an Underground Labyrinth to Cool Fresh Air under UAE Conditions. Presented at the 8th International Conference on Multi-purpose High-Rise Towers and Tall buildings (IFHS 2007).Abu Dhabi, UAE. December 10-12.

Abu-Hijleh, B. (2007). Improving the Energy Use at the SPIC Factory. Presented at the 7th IASTED International Conference on Energy and Power (EuroEPS 2007).Palma de Mallorca, Spain. August 29 – 31.

Abu-Hijleh, B. (2007). Lamina Cross-Flow Conjugated Forced Convection Heat Transfer from a Cylinder with Fins. Presented at the ASME InterPACK 07 conference.Vancouver, Canada. 8-12 July.

Abu-Hijleh, B., Tu, J., & Xue, C. (2006). Correlation for Total Particle Deposition Efficiency in the Human Nasal Cavity. Presented at the International Conference on Bio-Nanotechnology. Al-Ain, UAE. 18-21 November.

Abu-Hijleh, B., A/K., & W. Massarweh (2005). Privatization of the Electricity Sector in Jordan: A Case Study of On-Site Power Generation. Presented at the 5th IASTED International Conference on Energy and Power Systems (EuroEPS 2005). Benalmadena, Spain. 15-17 June.

H., F., Li., J., Y., Tu., Subic, A., & Abu-Hijleh, B. (2004). The Leakage Analysis in a Twin-Screw Supercharger by Using an Integrated CAD/CFD Three-Dimensional Model. Presented at the International Conference on Computational Methods.Singapore. 15-17 December.

Tang, H., J., Y., Tu, H., F., Li, B. Abu-Hijleh, C.C. Xue, and C.G., Li, ”Dynamic Analysis of Airflow Features in a 3D Real-Anatomical Geometry of the Human Nasal Cavity,” presented at the 15th Australian Fluid Mechanics Conference, Sydney, Australia. 13-17 December.

Subic, A., Ilie, K., & Abu-Hijleh, B. (2004). Parametric Modeling of Rotor Profiles in Twin-Screw Superchargers. Presented at the FISITA 2004 World Automotive Congress. Barcelona, Spain. 23-27 May.

Tu, J., Abu-Hijleh, B., Xue, C. & Li, C., G. (2004). CFD Simulation of Air/Particle Flow in the Human Nasal Cavity. Presented at the 5th International Conference on Multiphase Flow, ICMF’04.Yokohama, Japan. 30 May- 4 June.

Shilton, T., Abu-Hijleh, B., &  Tu, J. Optimisation of Formula SAE Race Car Intake Manifold using CFD. Presented at the ASME Heat Transfer/Fluids Engineering Summer Conference.Charlotte, North Carolina, USA. 11-15 July.

Abu-Hijleh, B., A/K., Tu, J., & Subic, A. (2003). Effect of Rotor’s Angular Speed and Aspect Ratio on Entropy Generation in a Rotor-Casing Assembly. Presented at the 3rd International Conference on CFD in the Minerals and Process Industries. Melbourne, Australia. 10-12 December.

Abu-Hijleh, B. A/K., Tu, J., & Subic, A. (2003). Entropy Generation Reduction in a Rotor-Casing Assembly Using Inlet and Outlet Fillets. Presented at the 1st International Conference on Computational Methods in Fluid Power Technology. Melbourne, Australia. 26-28 November.

Abu-Hijleh, B., Tu, J., Subic, A., Li, H., F., &. Ilie, K. (2003).CFD Comparison of Clearance Flow in a Rotor- Casing Assembly using Asymmetric vs. Symmetric Lobe Rotors. Presented at the 2003 ASME International Mechanical Engineering Congress and R&D Expo.Washington, DC – USA. 16-21 November.

Erakovic, L., J., Subic, A., Abu-Hijleh, B., & McLaren, D. (2003). Modelling and Simulation of Chilean Needle Grass Spread during Slashing. Proceedings of the Integrative Modelling of Biophysical, Social and Economic Systems for Resource Management Solutions Conference (MODSM 2003).pp. 1557-1561. Queensland, Australia. 14-17 July.

Abu-Hijleh, B., Tu, J., Subic, A., & Fostineo, L. (2003). Effect of inlet/outlet fillets on the Clearance Flow in Rotor-Casing Assembly. Proceedings of the Integrative Modelling of Biophysical, Social and Economic Systems for Resource Management Solutions Conference (MODSM 2003).pp. 1921-1925. Queensland, Australia. 14-17 July.

Li, H., F., Abu-Hijleh, B., A/K., Tu, J., & Subic, A. (2003). The Numerical Calculation of Clearance Flow in Rotor- Casing Assemblies. Presented at the 5th International Congress on Industrial and Applied Mathematics (ICIAM 2003).Sydney, Australia. 7-11 July.

Abu-Hijleh, B., A/K., Tu, J., & Subic, A. (2002). Effect of Rotor’s Aspect Ratio on Entropy Generation in a Rotor- Casing Assembly. Proceedings of the 2nd. Int. Conference on Scientific & Engineering Computation (IC-SEC 2002).pp. 192-195.Singapore. 3-5 December.

Abu-Hijleh, B., A/K. (2001). Entropy Generation due to Laminar Forced Convection Heat Transfer from a Cylinder Covered with a Porous Layer in Cross-Flow. 35th ASME National Heat Transfer Conference.USA. June.

Abu-Hijleh, B., A/K. (2001). Entropy Generation due to Natural Convection Heat Transfer from a Cylinder Covered with a Porous Layer. First MIT Conference on Computational Fluid and Solid Mechanics.USA, June.

Abu-Hijleh, B., A/K. (2001). Laminar Forced Convection Heat Transfer from a Cylinder Covered with a Porous Layer in Cross-Flow. Second International Conference on Heat and Mass Transfer. Australia. May.

Abu-Hijleh, B., A/K. (1996). Numerical Solution of a Turbulent Reattaching Shear Layer Over a Backward Facing Step With Porous Floor Segment. Proceedings of the ASME Fluids Engineering Division Summer Meeting. Vol. 2, pp. 607-612. San Diego, California. 7-11 July.

Abu-Hijleh, B., & Samimy, M. (1989). An Experimental Study of a Reattaching Supersonic Shear Layer. AIAA paper # 89-1801, presented at the AIAA 20th Fluid Dynamics, Plasma Dynamics and Lasers Conference in Buffalo. N.Y., USA. June.

Samimy, M., &  Abu-Hijleh, B., A/K. (1988). Structure of a Reattaching Supersonic Shear Flow. AIAA paper # 88- 3615-CP, presented at the 1st National Fluid Dynamics Congress.Cincinnati, Ohio, USA. July.

Samimy, M., Abu-Hijleh, B., A/K., & Bhattacharyya, S. (1988). Performance of Laser Doppler Velocimeter with Polydisperse Seed Particles in High Speed Flows.  AIAA paper # 88-0425, presented at the AIAA 26th Aerospace Science Meeting.Reno, Nevada, USA. January.

 

Units

  • Renewable and Sustainable Resources.
  • Sustainable Built Environment
  • Efficient Building Services
  • Investigations in the Built Environment
APPLY
Online
Now

Find your graduate program and apply online.

     
      To complete your application 
                    Login here!
Course &
Programme Finder